|
Home > Video Line Corrector >
4 Channel Adaptive Video Equaliser, automatic correction up to 1mile (1.6km) with RG59 Coax Cable (BH261)
4 Channel Adaptive Video Equaliser, automatic correction up to 1mile (1.6km) with RG59 Coax Cable (BH261)
The BH261 unit will automatically equalise a video signal at the push of a button and deliver a high quality signal over RG59 coax cable of up to 1mile (1.6km). A 12V DC power supply is included with the unit, no other equipment is required.
• Fully automatic, no user adjustment required
• Automatically restores settings on power up
• Automatic cable type compensation
• Low power consumption
• No set-up test equipment required
• Simple and quick installation
• 4 Channels
• 19" Rack Mountable
TECHNICAL |
DESCRIPTION |
INPUT SIGNAL TYPE |
Unbalanced Composite video signal. NTSC or PAL |
INPUT IMPEDANCE |
75 Ohm |
OUTPUT SIGNAL |
1.0V Pk-Pk @ 75 Ohm |
SIGNAL INPUT CONNECTOR |
4 x BNC male type coax connector |
SIGNAL OUTPUT CONNECTOR |
4 x BNC male type coax connector |
AT UNITY GAIN |
Differential Phase <1º. Differential Gain <1% |
BANDWIDTH |
40Hz to 6MHZ |
PERFORMANCE |
Will equalise a video signal on the following cable types:
RG59 Copper Coax up to 1 mile (1.6km)
RG59 Copper Coated Steel Coax 1/3 mile (500m)
*If you have a specific cable you would like us to test, please contact us at the address below. |
SURGE PROTECTION |
Transorbs and gas tubes fitted as standard |
POWER REQUIREMENTS |
12V DC @ 450mA |
POWER SUPPLY |
Included, international plug top switch-mode regulated power
supply 90 – 265Vac power consumption nominally 13 Watts.
Supplied with ‘country specific’ input connector. |
POWER CONNECTOR |
Screw terminal maximum cable size 4mm²
loaded screw less terminal block |
OPERATING TEMP |
-30ºC to +45ºC |
CONTROLS |
Auto setup button
|
INDICATOR LED’s |
Green LED indicates power
Yellow LED indicates signal equalised and ‘SET’
|
DIMENSIONS |
132mm L x 45mm W x 23mm H (excluding BNC connectors) |
MOUNTING |
Via 2 x 3.5mm holes for convenient screw fixing |
Ordering Information:
For a quotation, further details or technical support and
advice, contact us by phone on +44 (0)1483 480969, fax +44
(0)1483 797268 or email us, quoting
part number BH261.
Products available for use with BH261:
BH207 Video Distribution Amplifier, 1in 4out
|